Sunnex CS2050D (Dual) Manual do Utilizador descarregar pdf (Página 18)

INSTALLATION AND OPERATING MANUAL

Figure 13

3. Measure and mark on the wall board two vertical lines for three lag bolts, right and left of the

wall board. Drill three holes on each line, approximately the size of the lag bolts chosen for

mounting.

RECOMMENDATION: LAG BOLTS OF AT LEAST 1/4” X 5” (M8 X 130mm) LONG,

WITH WASHERS, SHOULD BE USED. BE SURE TO DRILL APPROPRIATE PILOT

HOLES OF ADEQUATE DEPTH TO AVOID BREAKING THE BOLTS.

75” (190cm)

64.875” (165cm)

floor to bottom of

wall board

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Sem comentários

Sunnex CS2050D (Dual) Manual do Utilizador Página 18